200kw 270HP 660V 568rpm Brush DC Electric Motor

200kw 270HP 660V 568rpm Brush DC Electric Motor

 

Z Collection DC Motor     

 

Electrical power: 55kw- 1600KW

Voltage: standard 400V, 440V, 660V

Speed: rated velocity reference

Security Diploma: IP23/IP44

Insulation Class: F

Duty: S1

Package: export wood deal

Payment: thirty% in progress, equilibrium by T/T or L/C at sight

 

Z355-4A, 200KW, 660V, 568r/min, IC06, IP23/IP44, F Insulation

 

CZPT

 1. The methods and safety degree of the motor

a) The strategy of cooling of the motor is individually-cooled, according to GB/T1993 “Strategy of cooling of rotating electrical equipment”, there are IC06, IC17, IC37, IC86W. CZPT entrance of cooling air is at the end of the major transmission(not the commutator facet). The security class of the motor can be divided into IP23 and IP44 in accordance to the GB/T4942.1 and IEC34-five. If the user demands other technique of cooling and protect class, it can be negotiated.

b) the relation between the strategy of cooling and the defense diploma of the motor pls see

Table 1.

 c) the cooling technique, wind strain, cooling drinking water flux, motor energy see: Desk 2.

Frame

Built-on blower

air-to-water warmth exchanger

cooling wind

Wind stress (whisht stress)

motor power

bodyweight

Cooling h2o flux

motor electrical power

excess weight

m³/hr

Pa

KW

KG

m³/hr

KW

KG

H500

10000

1900

seven.five

300

19

11

900

H560

16500

2250

15.

400

22

18.5

1100

H710

23500

2400

18.five

600

forty

two*eleven

1600

two. The installation and the sort of motor in accordance to the GB/T997 “the construction and set up type of rotating electrical equipment”, have IM1001(Horizontal bottom install, column biaxial) and IM1002 (Horizontal bottom set up, column biaxial). If the user demands other sorts of installation structure, it should be negotiated.

3. The position of terminal box on normal motor is on the right aspect when seeing from the primary travel end. It can also be mounted on the left side, but it must be composed in the get contract.

4. The motor employing rolling bearing, nonstop incorporating oil construction.

five. The motor can be put in the subsequent accessories at the user’s choice.

a) temperature detector component can be set into stator winding and bearing area of 2 side, and connect the outlet wire to the terminal box.

b) The non-generate celebration of the machine can equipped with tacho-generator, centrifugal beginning switch, coder and other folks which build up the speed meter guarding gadget.

c) Heater for protecting against condensation can be put in in the motor, but it should be created in the other speak to

six. The air-to water heat exchanger is typically mounted on the best of the motor. If the person desires to be put in on the facet of the motor, the user have to place CZPT it when purchasing and settle the assistant upholder by the person himself.

seven. The cooler outfitted with wind force switch, temperature controller, heater for preventing condensation and pther protect device.

 

Order notice

one. The motor type, power, voltage, running speed, excitation type, cooling type, number of output draft, position of outlet box, etc. Must be written when ordering.

2. Pls give clear indication of the accessory’s type, specification and number installed on the motor when ordering.

3. If the environment of using is special, humid torrid zone type motor is needed pls write “H” after the original type.

four. If you have some special requirement of the specification and technical requirement which is not listed in the booklet, pls contact us.

Packaging & Shipping

Testing Products

200kw 270HP 660V 568rpm Brush DC Electric Motor